Troubleshooting; Fixture Cleaning - Prolight EQLED052 User Manual

Following are a few common problems that may occur
during operation and

troubleshooting:

A. The unit does not work, no light and the fan does not work
1. Check the connection of the power and the main fuse.
B. Not responding to DMX controller
1. DMX LED should be on. If not, check DMX cables to see if linked
correctly.
2. If the DMX address is showing but no response to the controller,
check the address settings and DMX polarity.
3. Try another DMX controller.
C. No response to the sound
1. Make sure the unit is not receiving a DMX signal.
2. Check the microphone to see if it is good by tapping it. The
microphone is located on the bottom plate of the unit.

5. Fixture Cleaning

The cleaning of external optical lenses must be carried out
periodically to optimize light output. Cleaning frequency depends on
the environment in which the fixture operates: damp, smoky or
particularly dirty surrounding can cause a greater accumulation of
dirt on the unit's optics.
Clean with a soft cloth using normal glass cleaning fluid or mild
soapy water.
Ÿ Always dry the parts carefully.
Ÿ
Clean the external optics at least every 20 days.
some suggestions for easy