Advertisement
SOUN
SENS
LED
DISP INVERT
PAN INVERT
TILT INVERT
TEST
FHRS
VER
RSET
DMX Address Setting
Press the MENU button to select
and the display will blink. Use the DOWN and UP buttons to choose
the address. Once the mode has been selected, press the ENTER
button to confirm. To go back to the functions without any changes
press the MENU button again. Press and hold the MENU button for
one second or wait for one minute to go back to the main menu.
Channel Mode
Press the MENU button to select
and the display will blink. Use the DOWN and UP buttons to select
the
(1 Channel) mode,
Channel) mode. Once the mode has been selected, press the
FAST
ON
OFF
000-100
ON
OFF
YES
NO
YES
NO
Self-Test
Software Version
RSET
. Press the ENTER button
. Press the ENTER button
(8 Channel) mode or
(10
ENTER button to confirm. To go back to the functions without any
changes press the MENU button again. Press and hold the MENU
button for one second or wait for one minute to go back to the main
menu.
Master Mode or
Press the MENU button to select
the display will blink. Use the DOWN and UP buttons to select the
(Slave 1),
(Slave 2) or
mode has been selected, press the ENTER button to confirm. To go
back to the functions without any changes press the MENU button
again. Press and hold the MENU button for one second or wait for one
minute to go back to the main menu.
Show Mode
Press the MENU button to select
the display will blink. Use the DOWN and UP buttons to select the
(slow) or
(normal) or
mode has been selected, press the ENTER button to confirm. To go
back to the functions without any changes press the MENU button
again. Press and hold the MENU button for one second or wait for one
minute to go back to the main menu.
Sound Mode
Press the MENU button to select
the display will blink. Use the DOWN and UP buttons to select the
(sound on) or
(sound off) mode. Once the mode has been
selected, press the ENTER button to confirm. To go back to the
functions without any changes press the MENU button again. Press and
hold the MENU button for one second or wait for one minute to go back
Slave Mode
. Press the ENTER button and
(Master) mode. Once the
. Press the ENTER button and
(fast) mode. Once the
. Press the ENTER button and
Advertisement
