EQUINOX FUSION SCAN MAX Contents Safety Instructions Features & Specifications How To Set The Unit Troubleshooting User Manual Fixture Cleaning EQLED052...
Safety Instruction Do not touch any power cables during operation as the high voltage may cause an electric shock. Please read the instructions carefully as they include Warning important information about installation, usage and To prevent or reduce the risk of electrical shock or fire, do not expose WARNING maintenance.
2. Features & Technical Specifications DMX input/output Control: Sound active, Auto, Master/slave and DMX-512 modes For DMX 512 linking. Use a 3-pin XLR cable to link to the controller or to DMX Channels: 1CH/8CH/10CH other units. Gobos/colours: 7 Gobos /colours+ open/white Electronic dimming: 0-100% Voltage: 100V~240V, 50/60Hz...
Page 4
ENTER button to confirm. To go back to the functions without any FAST changes press the MENU button again. Press and hold the MENU SOUN button for one second or wait for one minute to go back to the main menu.
Page 5
to the main menu. and the display will blink. Use the DOWN and UP buttons to select the (normal) or (pan inversion) mode. Once the mode has been selected, press the ENTER button to confirm. To go back to the Sound Sensitivity functions without any changes press the MENU button again.
Page 6
Press the ENTER button and the display will show the version of DMX controller, you will need to set a DMX address from 1 to 512 so that software of the unit. To go back to the functions press the MENU the units can receive a DMX signal.
Following are a few common problems that may occur during operation some suggestions easy troubleshooting: A. The unit does not work, no light and the fan does not work 1. Check the connection of the power and the main fuse. B.