1. Manuals
  2. Brands
  3. Prolight Manuals
  4. DJ Equipment
  5. CP-64U HP
  6. User manual

Prolight CP-64U HP User Manual

Hide thumbs
1
2
3
4
5
6
Table of Contents

Advertisement

Quick Links

Download this manual
CP-64U HP

TABLE OF CONTENTS

1. Safety Instructions
User Manual
Please read the instructions carefully before use
1A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CP-64U HP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Prolight CP-64U HP

Summary of Contents for Prolight CP-64U HP

  • Page 1: Table Of Contents

    CP-64U HP TABLE OF CONTENTS 1. Safety Instructions 2. Technical Specifications 3. Installation 4. How to set the unit 5. How to control the fixture 6. DMX512 Configuration 7. DMX512 Connections 8. Troubleshooting 9. Fixture Cleaning User Manual Please read the instructions carefully before use...

  • Page 2: Technical Specifications

    1. Safety Introductions damaged. Caution Please read the instructions carefully which includes important There are no user serviceable parts inside the fixture. Do not open the housing or attempt information about the installation, operation and maintenance. WARNING any repairs yourself. In the unlikely situation, your unit may require service, please contact your nearest dealer.
  • Page 3 press the ENTER button to setup or it will automatically return to the main functions without button and the DMX address of the fixture can be set automatically by built-in program. To go any change after idling 8 seconds. To go back to the functions without any change press the back to the functions press the MENU button again.

  • Page 4: How To Control The Fixture

    4.2 DMX Address Setting Led Display A. Automatic DMX-addressing The DMX address of fixture can be set automatically. You have to press the Press the MENU button up to when the is showing on the display. Pressing button from the first fixture and hold for 5secs, the DMX start address of it will be set to ENTER button and the display will blink.

  • Page 5: Dmx512 Configuration

    6. DMX512 Configuration A. Universal DMX controller The fixture can be set the DMX address remotely by universal DMX controller. First, you need to programming two scenes into a chase, and then link the fixtures to the universal DMX controller. When you run the chase, all the fixtures of the chain will be set the series DMX address automatically.

  • Page 6: Troubleshooting

    signal errors. Solder a 120-ohm 1/4W resistor between pin 2(DMX-) and pin 9. Fixture Cleaning 3(DMX+) into a 3-pin XLR-plug and plug it in the DMX-output of the last fixture. The cleaning of internal must be carried out periodically to optimize light output. Cleaning 5.

Table of Contents