Table of Contents
Advertisement
10/2011
1010578-00
The assembly is the same process in reverse order.
When assembling the device please note:
–
Support the canopy panel with one hand so that it does not fall down.
–
Reinstall and retighten the screws. Reinstall the middle screws first and
then the outer screws.
7.12
Cleaning or replacing the lamps in the
side section
NOTE:
Please maintain the correct order of the Beauty Light lamps
and UV low pressure lamps.
For the order of the lamps see page 33.
–
Removing the side section panel: see page 38.
Replacing the lamps: see page 41.
The assembly is the same process in reverse order.
Cleaning and maintenance
Operating instructions – 45
Advertisement
Table of Contents
