Clean Or Replace Lamps On The Side Panels - BEAUTY ANGEL CVT 42 (COL30L) Operating Instructions Manual

3 x
3 x
02/2012
Revision 7
5.9
First remove the left acrylic panel:
– Remove the screws.
– Remove the acrylic panel and carefully lay it aside.
3 x
10987 / 1
Upper lamp cover:
– Loosen screws 3-4 mm.
– Take off the lamp cover.
Replace the lamps: See page 34.
Replace the starter: See page 35.
Right acrylic glass panel:
– Remove the screws.
3 x
10649 / 1
0071106701
Clean or replace lamps on the side
panels
WARNING!
Acrylic panels may be damaged!
Residue on the panels, combined with the heat generated by
the lamps can result in long term damage to panels.
Clean throughly between each use.
–
NOTE:
There is a risk of damage being caused to the acrylic panels
and the cockpit control and the side walls!
Observe the order: First remove the acrylic cover on the
left and then the one on the right.
Do not rub the right acrylic panel against the cockpit
control when removing it.
Cleaning and maintenance
Operating Instructions - 37