Operation
26
6.6
Start
The device is started automatically with an internal or external timer.
NOTE:
Timer instructions see separate manual
(order no. 1008370-..).
6.6.1
Preparation time
Before the lamps turn on, you have a few minutes to prepare yourself. During
the preparation time you can switch on the lamps at any time by pressing and
holding the START/STOP button.
–
Remove your clothes and all jewelry.
–
Remove make-up and other cosmetics.
–
Remove glasses. Contact lenses can be worn under the protective
goggles.
–
Put on the protective goggles.
–
Lie down on the bed surface.
–
Close the canopy.
–
Press the START/STOP button.
Settings on start-up:
Beauty Light lamps or Beauty Light lamps + UV lamps
Facial cooling
Body cooling
Audio system
Voice Guide
Temptronic (not active for PURE BEAUTY)
6.6.2
Interrupt or end the application
The application ends automatically after the preset time has run down. The
internal body cooling fan continues to run for approx. three (3) minutes to
sufficiently cool the device.
–
To interrupt an application, press and hold button START/STOP anytime
during an application.
–
Press START/STOP again to restart the lamps.