Table of Contents
Advertisement
Cleaning and maintenance
30
7.3
Cleaning
WARNING!
Infections can be transferred through skin contact!
All items/equipment components, with which the user can
come into contact during the application, must be disinfected
after every application:
–
Protective goggles
–
Acrylic panel
–
Handles and control panel
–
Sensor and base station
–
MP3 cable
–
Adjustable air jets
–
Use only approved cleaners to disinfect the tanning
system and its components.
7.3.1
Disinfection
For hygienic proper disinfection, use a specially developed disinfectant
cleaner (such as Lucasol).
NOTE:
For thorough disinfection, the product must be allowed to
remain in contact with the surface being disinfected for a
specified amount of time. Follow the manufacturer's instruc-
tions for use.
7.3.2
Cleaning of surfaces
Acrylic panel
CAUTION!
Do not rub with a dry cloth – danger of scratching!
–
For hygienic proper cleaning of acrylic surfaces, use a
specially developed disinfectant cleaner.
Other cleaning agents, especially concentrated disinfec-
tants or solvents (e.g. Lysoform, ethyl alcohol or other
liquids containing alcohol) must never be used for
cleaning.
Failure to observe this voids all warranty claims.
Plastic surfaces
For cleaning the remaining painted and unpainted plastic surfaces, it is best to
use warm water and a cloth. Never use aggressive cleaning agents contain-
ing alcohol or essential oils. These may lead to damages not covered by the
warranty.
Advertisement
Table of Contents
