Table of Contents
Advertisement
10/2011
1010578-00
7.9
Clean and calibrate the sensor
Clean the sensor
NOTE:
Do not spray the sensor directly with detergent.
Always remove the sensor from the station for cleaning.
–
Remove the sensor from the base station.
–
Clean the sensor housing, measuring window and base station with a
soft, damp cloth. See separate instructions (order no. 1005902-..).
–
Replace the sensor into the base station.
CAUTION!
Do not rub with a dry cloth – danger of scratching!
–
For hygienic proper cleaning of the sensor and base
station, use a specially developed disinfectant cleaner.
Other cleaning agents, especially concentrated disinfec-
tants or solvents (e.g. Lysoform, ethyl alcohol or other
liquids containing alcohol) must never be used for
cleaning.
Failure to observe this voids all warranty claims.
Calibrating the sensor (Calibration box order no. 1010702-..)
The sensor must be recalibrated every 90 days, so that the user's tanning
type can be determined reliably and the lamp output matched to the tanning
type.
Calibration: see separate instructions 'Calibration' (order no. 1006011-..).
Cleaning and maintenance
Operating instructions – 43
Advertisement
Table of Contents
