Cleaning and maintenance
54
7.19.2
–
Opening the bed base: see page 39.
–
Remove the canister.
–
Unscrew the lid on the new canister.
–
Remove the lid with the hose from the old canister.
14022 / 0
–
Screw the lid with the hose onto the new canister.
–
Push the hose well down so that it touches the bottom of the canister.
–
Put the canister back in the device.
–
Close the bed base. You should hear the bed base click into place.
14023 / 0
Venting
Replacing the AQUA MIST canister
NOTE:
Ventilate after changing the canister by switching over to
preset mode and then select Function 231 (see 'Presettings',
order no. 1008953-..).