Samsung WEA453e AP Installation Manual page 96

WEA453e Installation Manual
Item
RF
Miscellane
ous
Opinions
Samsung Electronics America
Main Inspection
Checklist
Cable connection
status
Cable tag installation
status
Antenna installation
status
Arrestor installation
status
Cable installation and
binding status
Cable connection
status
Cable tag installation
status
Reserved ports and
cable connection
status
Equipment connection
I/O port (conduit/cable
gland)
Cable installation route
status
Clean-up state for
inside/outside and the
surrounding area of
the system.
Evaluation Criteria
materials used.
Check the power connection status for
each cable according to the pin map
configuration.
Check the pressure terminal/connector's
assembly and tightened status to
determine if the tightening torque value
has been met.
Check the location, labeling, and tag
installation method used.
Check the specifications, installation
position, mounting status, and gap
between each antenna.
Check the specifications, installation
position, and mounting status.
Check the damage/installed route/
bending radius of cables and the
materials used.
Check the cable connection status, the
connector assembly, and the tightened
state.
Check if the tightening torque value has
been met.
Check the finishing status.
Check the location, labeling, and tag
installation method used.
Check the finishing status (waterproof
caps, etc.).
Check the tightened status.
Check the status of the cable tray, duct,
and other installation items.
Check for any disposed materials/items/
packing materials and the overall clean-
up status.
Version 1.0
Inspection
Results
Pass Fail
Page 96 of 117