Installation Safety Procedures - Samsung WEA453e AP Installation Manual

WEA453e Installation Manual
1.3

Installation Safety Procedures

When installing the system, be cautious of the following in order to avoid any safety issues
or accidents:
Before Installing the Product
Post warning signs in the area where the high voltage cables are located.

Post warning signs near the areas where a safety accident may occur.

Block any open spaces, such as connections and scaffolding, by using guardrails or

fences.
During Installation
Proceed with the installation only after all system power has been completely shut off.

When moving or installing the system, be careful not to damage or scratch the boards,

or the cables between the boards, that are mounted on the system.
After Completing the Installation
Clean up all of the waste materials that accumulated from the installation procedure and
tidy up the area.
Samsung Electronics America
When installing the system, make sure that the power supply is turned off.
Installing the system with the power turned on may cause serious damages or
fatal injury.
When drilling into a wall, the operator must wear protective gloves and safety
goggles to avoid any injuries caused by splinters.
Do not wear any metal accessories, such as watches or rings, in order to avoid
an electric shock.
All unused ports must be covered with waterproof caps to prevent an inflow of
any foreign substances.
Any outdoor materials (such as the metal band and the screws) must be stainless
steel (STS 304). Otherwise, the metal can become corroded and rust.
Be careful not to damage the cable installation area during the cleaning process.
Be careful to avoid any contact with the power supply by any foreign substance
while cleaning up which may result in a product malfunction.
Version 1.0
Page 18 of 117