WEA453e Installation Manual
2) Install the LAN cable from the switch (or router) to the Outdoor AP LAN port.
Samsung Electronics America
The connector pin map provided above is based on the system-side connector.
Confirm that the pin link point for the connector is linked to the cable before
assembly.
Complete the following finishing touch to keep the ports for the system input/
output (power or external interface) and cable connection free of any foreign
substances, air, or moisture.
- Unused port or connection:
Use a waterproof cap, rubber packing, or other finishing materials.
- Port or connection with a cable installed:
After installing the cable, use a pressed sponge, rubber packing, or silicon to
remove any gaps in the port or the connection.
Switch or Router
Figure 49. Connecting a LAN Cable (1)
[Outdoor AP]
LAN Cable
Version 1.0
Page 73 of 117