Carrying And Unpacking; Moving The Components; Unpacking The Components - Samsung WEA453e AP Installation Manual

WEA453e Installation Manual
2.3

Carrying and Unpacking

This process outlines how to carry the system and other components to the installation site
and how to unpack them.
2.3.1

Moving the Components

When bringing in the system components, keep in mind the following:
Firmly secure the components in the transporting vehicle and do not exceed the valid

vibration range (1-500 Hz) while transporting the system.
When the operators carry the system components by hand, they must use a cart or a lift

to move the system to the site and also have enough people to carry them.
Clear an adequate space and remove all obstructions before moving the system.

Avoid any physical impact, dust, humidity, or static electricity that may cause any

system damage while moving it.
2.3.2

Unpacking the Components

When unpacking the components, keep in mind the following:
Do not unpack the components until they arrive at the installation site.

Sort the supplies by job specifications and store the components in a safe place where

they will not disturb the installation.
Start installing the system immediately after unpacking the components. If the

installation cannot be completed immediately, store the system at the installation site.
Unpack the external packaging first.

Unpack the internal packaging after arranging the components in their respective

installation positions.
Do not recycle the unused materials. Dispose of the packaging materials in according

with the local waste disposal regulations.
Samsung Electronics America
Version 1.0
Page 23 of 117