WEA453e Installation Manual
5) Attach the top part using a screw.
Mounting the Adapter to a Pole
1) Prepare the following components:
Item
Components
Regulated Torque Value
Required Tool
Samsung Electronics America
Figure 24. Mounting the Outdoor AP on a Pole (4)
Table 14. Materials and Tools for Mounting the Adapter to a Pole
Adapter Bracket
Metal Band
M4 '+' Screw(WSP)
M4 Screw(WSP)
'+' Driver
The tightening components that are used for mounting the adapter to a pole must
be stainless steel (STS 304).
If this is not followed, the components can become corroded and rust.
M4 Torx Screw (WSP)
Description
1 EA
1 EA
4 EA
9.52-14.28 kgf·cm
Version 1.0
Page 41 of 117