07/2015
1015722-00B
4.15
Cleaning the filter mats in shoulder
tanner
–
Opening the bed base: see page 51.
–
Remove the screws and then remove the lamp cover.
–
Remove the filter mats.
–
Dry or moist clean the filter mats or replace with new ones.
Dry cleaning: Vacuum cleaner (depending on the degree of soiling)
Moist cleaning: Water and detergent
–
Do not clean in the dish-washer!
WARNING!
The device may be damaged by moisture!
The cleaned filters must be dry before they are replaced.
Cleaning and maintenance
Operating instructions – 63/84