Cleaning Or Replacing The Uv Lamps In The Shoulder Tanner - ergoline AFFINITY 700 ADVANCED PERFORMANCE Operating Instructions Manual

Cleaning and maintenance
60/84
4.12 Cleaning or replacing the UV lamps in
the shoulder tanner
DANGER!
Danger of burns from hot lamps and surfaces!
Finger and hands may get burned when replacing lamps
and filter panels or cleaning reflectors.
– Before carrying out maintenance work, wait until the
device has cooled down sufficiently.
– Opening the bed base: see page 51.
– Remove the screws and then remove the lamp cover.
Replacing lamps: see page 54.
Replacing starters: see page 55.
The assembly is the same process in reverse order.
When assembling the device please note:
– The bed base must lock with an audible click when closed.