High Pressure Lamps And Filter Panels - ergoline AFFINITY 700 ADVANCED PERFORMANCE Operating Instructions Manual

Cleaning and maintenance
56/84
4.8.4

High pressure lamps and filter panels

DANGER!
Danger of burns from hot lamps and surfaces!
Finger and hands may get burned when replacing lamps
and filter panels or cleaning reflectors.
– Before carrying out maintenance work, wait until the
device has cooled down sufficiently.
Fire hazard due to overheated lamps!
Non-approved high pressure lamps can explode. Hot lamp
components can set other parts on fire. People can be killed
or severely injured due to smoke inhalation and fire.
– Only fit the high pressure lamps specified by the manu-
facturer.
– Clean the inside of the device regularly. Dust particles
are flammable!
– Open the clamps.
– Lift the filter panel, pull it out of the guide and remove it.
– Unplug the UV lamps.
– Clean the reflector.
– Only utilize original UV lamps.