Cables And Adapters; Sfp Module Cables; Console Port Adapter Pinouts - Cisco IE 4010 Hardware Installation Manual

Cable and Connectors

Cables and Adapters

Figure 40 Alarm Port Details
Cables and Adapters

SFP Module Cables, page 55

Console Port Adapter Pinouts, page 55

SFP Module Cables

Each port must match the wave-length specifications on each end of the cable, and for reliable communications, the
cable must not exceed the allowable length.
For more information about SFP/SFP+ modules and cables, see

Console Port Adapter Pinouts

The console port uses an 8-pin RJ-45 connector. If you did not order a console cable, you need to provide an
RJ-45-to-DB-9 adapter cable to connect the switch console port to a PC console port. You need to provide an
RJ-45-to-DB-25 female DTE adapter if you want to connect the switch console port to a terminal. You can order an
adapter (part number ACS-DSBUASYN=).
Table 11 on page 56 lists the pinouts for the console port, the RJ-45-to-DB-9 adapter cable, and the console device.
Transceiver Modules.
55