Cisco IE 4010 Hardware Installation Manual page 22

Switch Installation
Installing the Switch
Figure 10 Inserting the Rubber Plug
1 Rubber plug
2 Switch
1. Identify your bracket mounting position. See
2. Insert the rubber plugs in the appropriate holes on both sides of the switch. See
3. Use a screwdriver or pen to completely push in the rubber plugs. See
4. Install the brackets on both sides of the switch. See
Brackets for 19-Inch Racks for IP-30 Compliance (Optional), page
1
2
3
3 Screwdriver
Attaching Brackets for 19-Inch Racks, page
Figure 10 on page
Attaching Brackets for 19-Inch Racks, page 15
17.
18
15.
Figure 11 on page 19.
18.
and Attaching