Cisco IE 4010 Hardware Installation Manual page 38

Power Supply Installation
Power-Supply Modules
Power-Supply Modules
Table 10 Power Supply Modules
Model
PWR-RGD-LOW-DC-H
PWR-RGD-AC-DC-H
Figure 20 PWR-RGD-AC-DC-H Power-Supply Module
1 Power-supply module
2 PSU OK LED
Figure 21 PWR-RGD-LOW-DC-H Power-Supply Module
1 Power-supply module
2 PSU OK LED
Note: Power Supplies with the -H suffix are required for hazardous environment installations. Non hazardous
environments may use either -H or non -H supplies.
For a description of the PSU OK LEDs, see the
Description
Low-voltage DC. For detailed specifications, see the
High-voltage AC or DC. For detailed specifications, see the
1
2
1
2
Power-Supply Module LEDs, page
3
3 Captive screw
3
3 Captive screw
34
IE 4010 Data Sheet.
IE 4010 Data Sheet.
8.