General Troubleshooting; Printer Does Not Power On; This Section Includes: Printer Does Not Power On - Xerox VersaLink C7000 User Manual

Troubleshooting

General Troubleshooting

This section includes:
• Printer Does Not Power On ......................................................................................................................................... 146
• Printer Resets or Powers Off Frequently ................................................................................................................ 147
• Printer Does Not Print ................................................................................................................................................... 147
• Printing Takes Too Long .............................................................................................................................................. 148
• Document Prints From Wrong Tray ........................................................................................................................ 149
• Automatic 2-Sided Printing Problems .................................................................................................................... 149
• Printer is Making Unusual Noises ............................................................................................................................. 149
• Paper Tray Does Not Close ......................................................................................................................................... 149
• Condensation has Formed Inside the Printer ...................................................................................................... 149
This section contains procedures to help you locate and resolve problems. Resolve some problems by
simply restarting the printer.

Printer Does Not Power On

Probable Causes
The power switch is not switched on.
The power cord is not plugged into the outlet
correctly.
The power cord is not secured in place
correctly.
Something is wrong with the outlet
connected to the printer.
The printer is connected to an outlet with a
voltage or frequency that does not match the
printer specifications.
CAUTION: Plug the three-wire cord with grounding prong directly into a grounded AC outlet.
146 Xerox VersaLink
®
User Guide
Solutions
• Open the front door, then and check that the power switch is
• At the printer control panel, press the Power/Wake button.
Power off the printer, then plug the power cord into the outlet
securely. Use the bracket provided with the printer to secure the
power cord in place.
• Use the bracket provided with the printer to secure the power
• Plug another electrical appliance into the outlet and check if
• Try a different outlet.
Use a power source with the specifications listed in the
Specifications
C7000 Color Printer
®
in the On position.
For details, refer to Powering On and Off the Printer
page 25.
cord in place.
it operates properly.
on page 184.
on
Electrical