Xerox VersaLink C7000 User Manual page 141

To print the sample pages, touch Print Sample.
7.
8. When printing is completed, touch Close.
9. On the sample pages, for Side 1, use a ruler to measure the distance of the printed image from the
top, bottom, left, and right edges.
Note: For identification, a single dot is printed on Side 1, and two dots are printed on Side 2.
10. For Side 2, measure the distance of the printed image from the top, bottom, left, and right edges.
11. If the image is centered, no adjustment is required. If not centered, adjust the paper registration.
For details, refer to
Performing a Paper Registration Adjustment
At the printer control panel, press the Home button.
1.
2. Log in as administrator. For details, refer to Logging In as the Administrator.
Touch Device > Support > Image Position.
3.
4. To adjust registration, select the source paper tray.
Touch Paper Supply.
a.
b. Touch the desired tray.
5. Using the chart printed in Verifying Paper Registration, select the side for registration.
For adjusting Side 1, touch Adjusted Side, then touch Side 1.
a.
b. For adjusting Side 2, touch Adjusted Side, then touch Side 2.
6. To adjust the registration, touch Lead/Side Registration.
To adjust the side-to-side registration, for Side Registration, touch Plus (+) or Minus (-).
a.
b. To adjust the top-to-bottom registration, for Lead Registration, touch Plus (+) or Minus (-).
For reference, position the chart so that Side-1 or Side-2 dots are at the bottom of the page.
Performing a Paper Registration Adjustment on page 141.
Xerox VersaLink C7000 Color Printer
® ®
Maintenance
141
User Guide