General View Basic Setups - vacuubrand CVC 2 Instructions For Use Manual

General view basic setups

II
CVC 2
setting pressure unit (mbar / Torr / hPa)
setting basic setup
basic setup "Standard" (factory-set)
controller switches
-
-
basic setup "Management"*
controller switches
-
-
-
basic setup "Management Plus" *
controller switches
-
-
-
basic setup "VACUU•LAN"*
controller switches
-
values
-
* only in combination with Vacuum-Management-
System VMS Module A
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. manual-no.: 99 90 20 / 01/12/2004
page 9 of 36
solenoid operated isolation valve (indispensable)
cooling water valve (optional)
pump
solenoid operated isolation valve if connected
cooling water valve (optional)
pump, but with after-running to pump out condensate
solenoid operated isolation valve (indispensable)
cooling water valve (optional)
pump according to preset pressure and time
solenoid operated isolation valve if connected
configuration of the cooling water valve if applicable
automatic identification of the solenoid operated isolation valve
ready to
start