DEWESOFT SIRIUS Technical Reference Manual page 11

DEWESoft® DEWESoft® DEWESoft®
for exact values please refer to enclosed specifications.
Use measurement leads or measurement accessories aligned to the specification of the system only. Fire hazard
in case of overload!
Do not switch on the system after transporting it from a cold into a warm room and vice versa. The thereby
created condensation may damage your system. Acclimatise the system unpowered to room temperature.
Do not disassemble the system! There is a high risk of getting a perilous electric shock. Capacitors still might
be charged, even if the system has been removed from the power supply.
The electrical installations and equipments in industrial facilities must be observed by the security regulations
and insurance institutions.
The use of the measuring system in schools and other training facilities must be observed by skilled personnel.
The measuring systems are not designed for use at humans and animals.
Please contact a professional if you have doubts about the method of operation, safety or the connection of the
system.
Please be careful with the product. Shocks, hits and dropping it from already lower level may damage your
system.
Please also consider the detailed technical reference manual as well as the security advices of the connected
systems.
This product has left the factory in safety-related flawless and in proper condition.
In order to maintain this condition and guarantee safety use, the user has to consider the security advices and warnings
in this manual.
EN 61326-3-1:2008
IEC 61326-1 applies to this part of IEC 61326 but is limited to systems and equipment for industrial applications
intended to perform safety functions as defined in IEC 61508 with SIL 1-3.
The electromagnetic environments encompassed by this product family standard are industrial, both indoor and outdoor,
as described for industrial locations in IEC 61000-6-2 or defined in 3.7 of IEC 61326-1.
Equipment and systems intended for use in other electromagnetic environments, for example, in the process industry or
in environments with potentially explosive atmospheres, are excluded from the scope of this product family standard,
IEC 61326-3-1.
Devices and systems according to IEC 61508 or IEC 61511 which are considered as "operationally well-tried", are
excluded from the scope of IEC 61326-3-1.
Fire-alarm and safety-alarm systems, intended for protection of buildings, are excluded from the scope of IEC
61326-3-1.
measurement innovation measurement innovation
Doc-Version: 1.4.2
DEWESoft® DEWESoft® DEWESoft®
measurement innovation measurement innovation
DEWESoft® DEWESoft®
measurement innovation
www.dewesoft.com
DEWESoft® DEWESoft® DEWESoft®
measurement innovation
Notice
DEWESoft®
measurement innovation
Page 5/166