Group Remote Controller - Fujitsu AUXB04GALH Service Manual

3-7-2 Group Remote Controller

UTY - CGG
WEEKLY TIMER
1. WEEKLY TIMER
The timer function is not available depending on the initial setting.
Different schedules can be set for each day of the week.
Four timers can be set for each day.
Operation on/off time, operation mode, and temperature can be specified for each timer.
To start / cancel the WEEKLY timer operation
The timer does not start if the time is not set.
Press the ALL TIMER button to start or cancel the WEEKLY timers for all indoor units.
Press the Select button to select the indoor unit.
Press the Timer Mode (DELETE) button to start or cancel the WEEKLY timers.
To set the WEEKLY timer
1
ı ˇ ı
Press the PROGRAM (CLOCK AD-
JUST) button.
* Do not press this button for two sec-
onds or more, otherwise you will en-
ter the time setting mode.
3
Day of the week setting
Press the DAY button to select the day of the week.
* For ALL, all of the days can be set together when a
each day.
4
Timer setting
Decrement Increment
Different schedules can be set for each day of the week.
Four timers can be set for each day
2
Press the Select button to select the indoor unit.
* If all indoor units are selected, the times for all of the registered indoor unit
timers are set at once.
S
ALL
SUN
appears around
Press the Set Time buttons to set the time in 10-minute increments.
* Hold down a Set Time button to adjust the time quickly.
* The time already set at another timer is skipped at the relevant indoor unit.
03-19
If any of the indoor units are in the timer mode, pressing this
button cancels the timers for all indoor units.
If none of the indoor units are in the timer mode, pressing
this button starts the timers for all indoor units.
Note: When a time is not set, the weekly timer cannot be started.
M T W
MON TUE WED
All indoor units
T F S
THU FRI SAT