Fujitsu AUXB04GALH Service Manual page 63

To start /cancel the WEEKLY timer operation
To start
The independent timer
will flash on the display.
When the weekly timer is selected,
the timer starts automatically.
NOTES
(1) PRECAUTIONS DURING WEEKLY TIMER SETUP
Setup is not possible in the following cases, so amend
the time.
Be sure to set the ON time first, then the OFF time. If
either the ON time or the OFF time is not set cor
rectly, the timer will not operate properly.
The WEEKLY 2 settings cannot be set earlier than the
WEEKLY 1 settings.
The WEEKLY 1 and WEEKLY 2 time spans cannot
overlap.
To set the DAY OFF (for a holiday)
1
During the weekly timer,
press the TIMER SET
button for 2 seconds or
more to set the day.
SU MO TU WE TH FR SA
3 6 9 12 15 18 21
NOTES
The DAY OFF setting is only available for days for which weekly settings already exist.
If the operating time carries over to the next day (during a next day setting), the effective DAY OFF range will be set as
shown below.
Normal
DAY OFF
ON OFF ON
WEEKLY WEEKLY
Preceding day Setting day
The DAY OFF setting can only be set one time.
The DAY OFF setting is cancelled automatically after the set day has passed.
3 6 9 12 15 18 21
ex.Operating time 7:00-18:00
Indpnd. OFF time 21:00
The operating time for the current
day is displayed.
2
Select the day to set the
DAY OFF.
SU MO TU WE TH FR SA
3 6 9 12 15 18 21
ex. The DAY OFF is set for Monday.
OFF
Next day
03-23
To cancel
Press the TIMER DELETE button to
cancel the timer mode.
The timer mode can also be canceled
by changing the timer mode using
the TIMER MODE button.
(2) The earliest OFF time you can set is 30 minutes after the
ON time.
(3) The OFF time can be carried over to the next day.
(4) The earliest independent OFF time you can set is 30 min-
utes after the last OFF time.
(5) An independent OFF time can be set up to 0:00 hours of
the next day.
(6) Even if the timer operation is set, the timer indicator lamp
of the indoor unit does not light up. (The timer indicator
lamp is used for wireless remote controllers only.)
3
Press the DAY (DAY OFF)
button for 2 seconds or
more to set the DAY OFF.
Flashing mark:
indicates the DAY OFF.
To cancel
Follow the same procedures as those
for setup.
Next day setting
ON
OFF
WEEKLY
Preceding day Setting day
4
Press the TIMER SET
button for 2 seconds or
more to complete the
DAY OFF setting.
DAY OFF
ON OFF
WEEKLY
Next day