Elevator Control Horn Installation - Black Horse Model SUPER AIR BH.05 Instruction Manual

SUPER AIR- Item code

6. After the epoxy has fully cured, remove
the masking tape or T-pins used to hold the
stabilizer in place and carefully inspect the
glue joints. Use more epoxy to fill in any
gaps that were not filled previously and
clean up the excess using a paper towel and
rubbing alcohol.
C/A glue
Top side
Bottom side.
BH05-A.
way of aileron control horn. Please see pic-
tures below.
Instruction Manual

ELEVATOR CONTROL HORN INSTALLATION.

Elevator control horn install as same as the
Control horn of elevator.
2 x12mm.
Control horn
of elevator.
Drill 1 hole
with 1.5 mm
diameter.
Secure.
17