Introduction - Fluke 7103 User Manual

2

Introduction

The Hart Scientific 7103 Micro-Bath may be used as a portable instrument or bench
top temperature calibrator for calibrating thermocouple and RTD temper ature probes.
The 7103 is small enough to use in the field, and accurate enough to use in the lab.
With an ambient temperature of 23°C (74°F), calibrations may be done over a range
of -30°C to 125°C (-22°F to 257°F). The resolution of the 7103 temperature display is
0.01 degrees.
The Micro-Bath calibrator features:
Built in programmable features include:
The temperature is accurately controlled by Hart's hybrid analog/digital con troller. The
controller uses a precision platinum RTD as a sensor and controls the well temperature
with thermal electric devices (TED).
The LED front panel continuously shows the current well temperature. The
temperature may be easily set with the control buttons to any desired tempera ture
within the specified range. The calibrator's multiple fault protection de vices insure
user and instrument safety and protection.
The 7103 Micro-Bath was designed for portability, low cost, and ease of opera tion.
Through proper use, the instrument will continuously provide accurate calibration
of temperature sensors and devices. The user should be familiar with the safety
guidelines and operating procedures of the calibrator as de scribed in the instruction
manual.
Shop for Fluke products online at:
Convenient handle
RS-232 interface
Switchable AC Input (115 VAC or 230 VAC)
Temperature scan rate control
Temperature switch hold
Eight Set-point memory
Adjustable readout in °C or °F
MyFlukeStore
www.
Introduction
1.877.766.5412
.com
7