Function Settings - Rcom REPTILE PRO 90 User Manual

North America Sales & Service www.RcomCo.com

4. Function Settings

Incubation start with Manual Mode
This mode helps users to set temperature, humidity etc.
according to their needs. This mode is ideal for those persons
who are experienced in incubation.
▶ Press MENU button on basic screen.
▶ Select the species of reptiles with UP/DOWN button and
press ENTER button then it goes to incubation conditions
setting mode.
▶ Set required temperature, humidity, and D.T.G setting
with UP/DOWN button, and press ENTER button to pass
to next step.
If there is no proper option, please select option other
reptiles, Refer to Page 14.
Temperature setting
▶ Incubation temperature input on the menu screen① is
memorized in the micro chip. User can change tempe
rature randomly.
[Basic memory value : ① it depends on reptile kind.]
▶ Incubation humidity input on the menu screen② is memo
rized in the micro chip. User can change humidity randomly.
[Basic memory value : ② it depends on reptile kind.]
Temperature and humidity is optimized when Rcom products are released. We do no recommend customers
to recalibrate by their own. If you need to recalibrate, please visit our website (www.rcom.co.kr→Download→
Manual) or ask purchase place. Because of low price thermometers and hygrometers are not accurate,
e recommend you to use special calibrated thermo-hydrometer. (Poultry only thermo-hydrometer: check
Rcom website)
12
Rcom Reptile Incubator Pro 90 User Manual
(2) Incubation start
with Manual Mode
MENU
* Press UP/DOWN button to select reptile
species and press ENTER.
Temperature Setting
Humidity Setting
Gecko
26.1
3Hr
80
0.0℃
①
UP
** Choose a kind **
* Chameleon
* Snake
* Alligator
DOWN
* Gecko
* Turtle
* Tortoise
* Bear.Dragon
ENTER
②
Temperature
Chameleon
①
26.1℃
NEXT
Humidity
Chameleon
80% ②
NEXT
DIGITAL INCUBATOR