Normal Measurement; Selecting The Measuring Parameters - Kanomax 2211 Operation Manual

3. NORMAL Measurement

This is the mode that you will be in, when you first
turn on the instrument. In this mode you cannot
save any data. The display will be updated every
1 second.
To move to NORMAL Mode from other measuring mode,
Press
Use

3.1 Selecting the Measuring Parameters

①
②
③
④
1.800.561.8187
.
to select "1. NORMAL".
Display
www.
<NORMAL MODE>
Press , and display mode moves in order, as shown below.
②CO, CO , Temperature→① CO, CO
2
<CO , CO Humidity Measuring>
2
Press , and display mode moves in order, as shown
below, Humidity, Dew Point Temperature [DT], Wet-bulb
Temperature [WB], Absolute Humidity [AH], and Humidity Ratio
[HR]).See P.45 for detailed information for each item.
<Due Point Temperature>
<Wet-bulb Temperature>
.com
Procedure
, Humidity
2
information@itm.com
10