Displaying And Maintaining Vrrp For Ipv6; Ipv4-Based Vrrp Configuration Examples; Single Vrrp Group Configuration Example - HP A5830 series Configuration Manual

advertisements for a specified period of time. To solve this problem, configure the same interval for
sending VRRP advertisements on each router in the VRRP group.

Displaying and maintaining VRRP for IPv6

To do...
• Display VRRP group
status
• Display VRRP group
statistics
• Clear VRRP group
statistics

IPv4-based VRRP configuration examples

This section provides these configuration examples:

Single VRRP group configuration example

•
VRRP interface tracking configuration example
•
VRRP with multiple VLANs configuration example
•
Single VRRP group configuration example
Network requirements
Host A wants to access Host B on the Internet, using 202.38.160.111/24 as its default gateway.
•
Switch A and Switch B belong to VRRP group 1 with the virtual IP address of 202.38.160.111/24.
•
When Switch A operates normally, packets sent from Host A to Host B are forwarded by Switch A;
•
when Switch A fails, packets sent from Host A to Host B are forwarded by Switch B.
Figure 35 Network diagram for single VRRP group configuration
Use the command...
display vrrp ipv6 [ verbose ] [ interface interface-
type interface-number [ vrid virtual-router-id ] ] [ | {
begin | exclude | include } regular-expression ]
display vrrp ipv6 statistics [ interface interface-type
interface-number [ vrid virtual-router-id ] ] [ | {
begin | exclude | include } regular-expression ]
reset vrrp ipv6 statistics [ interface interface-type
interface-number [ vrid virtual-router-id ] ]
132
Remarks
Available in any view
Available in any view
Available in user
view