Figure 15 Schematic diagram for a tangent-ring network
Intersecting rings
As shown in
between rings. You only need to define an RRPP domain and configure one ring as the primary ring and
the other rings as subrings.
Figure 16 Schematic diagram for an intersecting-ring network
Dual homed rings
As shown in
exist between rings. You only need to define an RRPP domain and configure one ring as the primary
ring and the other rings as subrings.
16, two or more rings are in the network topology and two common nodes exist
Figure
17, two or more rings are in the network topology and two similar common nodes
Figure
60