3.5
Step 5: Inserting the fi lter cartridge (see fi g. 9)
A Remove the protective strap (1).
B Insert the fi lter cartridge (4) vertically into the fi lter head (5).
C Turn the locking handle (3) until it clicks.
2.
3.
5.
1.
4.
(fi g. 9)
The fi lter cartridge can only be inserted when the locking
!
handle (3) is open.
Make sure that the fi lter cartridge is positioned correctly and
all O-Rings are correctly positioned.
1014663-001_GA_BRITA_Tap_AU.indb 9
1014663-001_GA_BRITA_Tap_AU.indb 9
3.6
!
A Attach the space-saving wall mount bracket (1) in place using
A.
B Engage the fi lter head (2) in the wall mount (1) using the notches
B.
1.
2.
3.
Step 6 (optional): Space-saving wall mount
to install the cartridge under the sink
(see fi g. 10)
During assembly, note the installation dimensions, bending
radii of the hoses and dimensions of the accessories. The
system can be operated with the fi lter cartridge in either
vertical or horizontal positions. Using the mounting bracket,
it should be installed only vertically, with the "UP" arrow on
the bracket correctly positioned.
two matching screws and use two wall plugs (not supplied),
depending on the type of wall. Position it in an accessible place
to allow for 90° pivoting of the head for easy exchange of the
fi lter.
(3) on the sides of the fi lter head to connect to the arms of the
bracket.
(fi g. 10)
9
ENGLISH
28.04.15 15:25
28.04.15 15:25