How The Brita Tap Cartridge Status Indicator Works; Signals; Reprogramming The Brita Tap Cartridge Status Indicator; Technical Data - Brita WD3030 Manual

b Hardness Setting (Button HARDNESS on the right side)
In Australia and New Zealand setting the hardness level is not
necessary and will have no impact on the cartridge lifetime.
c To change a setting, simply push the button until the right num-
ber of LED lights are fl ashing.
d Insert the BRITA Tap Cartridge Status Indicator into the BRITA
water dispenser's lever (see fi g. 3).
C How the BRITA Tap Cartridge Status Indicator works
To ensure optimal performance, you should change the fi lter
cartridge on a regular basis. The Cartridge Status Indicator in the
BRITA lever tells you when to change the fi lter cartridge.
D Signals
The three lights in the BRITA lever are only activated in the fi ltering
position. They indicate:
- Green light: The BRITA Tap fi lter is working.
- Yellow light: 90 % of the fi lter capacity has been used. Remem-
ber to buy a new replacement fi lter cartridge.
- Red light: The fi lter cartridge needs to be changed
E Reprogramming the BRITA Tap Cartridge Status
Indicator
If the maximum volume is reached or the cartridge has been used
for 6 months, the BRITA Tap Cartridge Status Indicator will start
fl ashing red (only if BRITA lever is in the fi ltering position).
In this case the fi lter cartridge should be replaced (chapter 4). Once
the cartridge has been replaced the BRITA Tap Cartridge Status
Indicator has to be reset. For this purpuse push the Reset Button
(fi g. 4) of the Cartridge Status Indicator for three seconds until it
starts fl ashing green (for this step, you do not need to remove the
BRITA Tap Cartridge Status Indicator from the BRITA lever).
If replacing the battery, commissioning should be followed in
accordance with section 3.2.
6
ENGLISH
1014663-001_GA_BRITA_Tap_AU.indb 6 1014663-001_GA_BRITA_Tap_AU.indb 6

Technical data:

• Battery: 1x CR2032 (removable)
• lifetime of battery: app. 2 years
(fi g. 4)
!
Do not immerse Cartridge Status Indicator in water.
(fi g. 3)
1. Cartridge Button
2. Hardness Button
3. Reset Button
28.04.15 15:25 28.04.15 15:25