Technical Data Of The A 1000 Cartridge - Brita WD3030 Manual

C Leak
Cause: Screwed connections not fi tted correctly.
Troubleshooting: Check mains pressure. Check all screwed
connections in accordance with chapter 3.4.
D No LED indication by usage
Cause: Battery is not inserted in a correct way or is
used up.
Troubleshooting: Check if battery is inserted properly. If neces-
sary, replace the battery.
For models WD 3030 and WD 3040 only
These models have an aerator with two integrated outlets. The
Inner one is for BRITA fi ltered water, the outer area for hot and cold
water.
1014663-001_GA_BRITA_Tap_AU.indb 11 1014663-001_GA_BRITA_Tap_AU.indb 11
8

Technical data of the A 1000 cartridge

Operating pressure
Water intake temperature
operation
Ambient tem-
perature during
storage/transport
Working fl ow range and associated
pressure loss
Working fl ow range and associated
pressure loss
Bed Volume
Weight (dry/wet)
Chlorine reduction NSF 42
Particle retention NSF 42
Chlorine reduction DIN EN 14898
Filter system (fi lter
head with fi lter car-
tridge)
Dimensions
(Width/Depth/ Filter cartridge
Height)
Installed dimensions
(vertical installation
with wall mounting)
Operating position
Water inlet connection
Water outlet connection
Filter performance
0.1 MPa to max. 0.36 MPa
4°C to 30°C
4°C to 40°C
–20°C to 50°C
30–180 L/h /
0.2–1.4 bar
30–180 L/h /
0.02–0.14 Mpa
0.23 L
0.4 kg/0.9 kg
Class I (50 %)
Class I (0.5 μm)
Class 1 (>90 %)
106 mm/92 mm/232 mm
86 mm/86 mm/224 mm
137 mm/122 mm/232 mm
Horizontal and vertical
G3/8"
G3/8"
Independent laboratory
test* reduction effi ciency
at least 97 % of following
substances, measured at
4000 L. Chlorine Bromo-
form Bromodichlorometh-
ane Tetrachlorethylene
Dibromochloromethane
Trichloroethylene
11
ENGLISH
28.04.15 15:25 28.04.15 15:25