Manual Switching Tests
...........................................................................................................................................................................................................................................................
7 - 1 4
............................................................................................................................................................................
Use the scroll bar in the
Step 8
the
rtrv-state-path
............................................................................................................................................................................
Click on the
Step 9
............................................................................................................................................................................
Step 10
Click
Send
Requirement:
followed by a
was active in Step 3 is no longer active and the other ring is now active.
............................................................................................................................................................................
Step 11
Repeat Step 4 through Step 10 to verify a switch back to the original
ring.
............................................................................................................................................................................
Check off the appropriate box in Appendix E, Installation Checklist.
Step 12
End of Steps
...........................................................................................................................................................................
Lucent Technologies - Proprietary
See notice on first page
Command Builder
command.
command.
rtrv-state-path
to issue the command.
The Response Window should display the command
indication as well as indicating that the ring that
COMPLD
Operational Tests
window to scroll down to
365-372-304
Issue 7, March 2003
Need help?
Do you have a question about the Metropolis and is the answer not in the manual?