Lucent Technologies Metropolis Installation Manual page 10

Circuit Pack Installation
Use of WaveStar™ CIT Software
A Short Tour of the Command Builder
Circuit Pack Firmware Version Verification
Provision/Enable/Disable TCP/IP on an IAO Lan Port
Provision/Enable/Disable the Metropolis
TCP/IP GNE
............................................................................................................................................................................................................................................................
6 Installation Tests
Overview
LBO Software Settings
Clearing Alarms
Local Equipment and Cross-connect Tests
DS1 Protection Switching
DS1 Cleanup Procedures
DS3/EC1 and TMUX Testing Procedure
DS3 Protection Switching
LNW66 and LNW 71 (10/100T) TX Ethernet cabling testing
OC-3 Testing
OC-12 Testing
OC-48 (Low Speed) Testing
LED Test
Additional Optical Tests (optional)
............................................................................................................................................................................................................................................................
7 Operational Tests
Overview
Office Alarm Test
Automatic Protection Switching and Alarm Test
Manual Switching Tests
External Timing Verification
Miscellaneous (Environmental) Discrete Telemetry Test
TL1/X.25 Connection Test
Modem Connection Test
Final Operations
...........................................................................................................................................................................................................................................................
C O N T E N T S
x
®
DMX Access Multiplexer as a TL1
Lucent Technologies - Proprietary
See notice on first page
5-4
5-7
5-11
5-15
5-18
5-22
6-1
6-3
6-6
6-7
6-12
6-17
6-21
6-28
6-36
6-42
6-47
6-53
6-59
6-60
7-1
7-4
7-9
7-13
7-15
7-19
7-23
7-24
7-27
365-372-304
Issue 7, March 2003