Lucent Technologies Metropolis Installation Manual page 327

Provision/Enable/Disable the Metropolis
Access Multiplexer as a TL1 TCP/IP GNE
...........................................................................................................................................................................................................................................................
365-372-304
Issue 7, March 2003
®
DMX
............................................................................................................................................................................
Step 2 On the System View menu, select
Administration > Data Communications
Result:
............................................................................................................................................................................
Step 3 In the Data Communications window, click on the TCP/IP tab at the
top of the window.
Result:
............................................................................................................................................................................
Verify that TCP/IP is properly provisioned and enabled for the required
Step 4
LAN port(s).
............................................................................................................................................................................
Step 5 In the Data Communications window, click on the TCP/IP Gateway tab
at the top of the window.
Result:
............................................................................................................................................................................
Step 6 From your work instructions, determine which IP calling addresses will
be allowed to access the Metropolis
............................................................................................................................................................................
Use the instructions on the screen to add, modify, or delete a gateway
Step 7
host from the TCP/IP Gateway Host List.
The following parameters apply:
• The OS host IP address which is four dot-separated decimal
numbers, each ranging from 0 to 255.
• The OS Host Name which may consist of 1 to 24 alpha-numeric
characters.
• The OS Type which may consist of standard types or listed as
other.
Repeat this step for each of the Host IP address you want to authorize
for access to the Metropolis
up to 50 provisioned entries in the list.
............................................................................................................................................................................
On the Data Communications window under TCP/IP Gateway
Step 8
Control, select Enable to enable the TCP/IP Gateway, or select
Disable to disable the TCP/IP Gateway.
Lucent Technologies - Proprietary
See notice on first page
Software Download and Circuit Pack Installation
The Data Communications window opens.
The TCP/IP parameters display.
The TCP/IP Gateway parameters display.
®
DMX TL1 TCP/IP GNE. There may be
®
DMX TL1 TCP/IP GNE.
5 - 2 3