Lucent Technologies Metropolis Installation Manual page 285

Initial Circuit Pack Installation
OC-48 Main OLIU
Installation
...........................................................................................................................................................................................................................................................
365-372-304
Issue 7, March 2003
Follow this procedure to install the following OC-48 OLIU circuit
packs in the Metropolis
• LNW26
• LNW26B
• LNW27
• LNW28
• LNW29
• LNW76
• LNW77
• LNW 121-159
• LNW121B-159B
• LNW221 - 259
Important!
mode. Locate the jumper on the card, it is shipped with the jumper
in the "normal" mode, which means it will function as an LNW26,
when the jumper is moved to the "enhanced" mode, the circuit pack
will function as an LNW26B. Refer to Figure 4-3, LNW26B,
LNW28, LNW77 Jumper location (page 4-14) for jumper location.
Important!
that you wish to set on the LNW121B - LNW159B or LNW221 -
LNW259. Use the Channel Select Option Label on the faceplate of
the circuit pack to determine the correct channel. Refer to
Figure 4-4, LNW121B - 159B Channel Positions (page 4-15) and
Figure 4-5, LNW221 - 259 Channel Positions (page 4-16) for
channel jumper location.
Remove the first OC-48 OLIU circuit pack from the packing material.
Step 1
............................................................................................................................................................................
Identify the M1 slot on the Metropolis
Step 2
Figure 4-2, Metropolis
............................................................................................................................................................................
Place the OC-48 OLIU circuit pack into the M1 slot on the Metropolis
Step 3
DMX High Capacity shelf. Do NOT engage the circuit pack in the
backplane connector.
............................................................................................................................................................................
Remove the second OC-48 OLIU from the packing material.
Step 4
Lucent Technologies - Proprietary
See notice on first page
Powering and Initial Circuit Pack Installation for DMX
®
DMX High Capacity shelf.
The LNW26B can operate in normal or enhanced
From your work orders, determine the wavelength
®
®
DMX High Capacity Shelf (page 4-10).
High Capacity Shelf
DMX High Capacity shelf. See
®
4 - 1 3