Saunatec Patio 4 x 6 Owner's Manual page 7

11. Drill the screws at an angle through the front and back walls into
the center beam.
12. Place the right ceiling panel on the room and be sure to
ensure the trim inside the room is fitting on the wall. Be
careful to push the wires from the front and back walls
into the ceiling openings.
13. Connect the electrical connectors and in put in the ceiling
holes and reinstall the electrical access cover.
NOTE: Double check all electrical connections! Once the
roofing is installed, electrical access is minimal.
710-0131
Rev. 02
Page 7 of 16
Electrical Access
05/05/15