Remove the mezzanine card.
4.
To replace the component:
CAUTION:
connector when installing the mezzanine card. Do not apply pressure to the edges of the card.
Install the mezzanine card. Press down on the connector to seat the board.
1.
Install the access panel
2.
Cache module capacitor pack
To remove the component:
Power down the server blade (on page 22).
1.
Remove the server blade (on page 23).
2.
To prevent damage to the server blade, apply pressure over the mezzanine
("Access
panel" on page 24).
Removal and replacement procedures 29