Device Configuration - Canon ScanFront 400 Instructions Manual

5.

Device Configuration

In the Device Configuration screen, you can configure the settings of the ScanFront scanner.
a
d
g
a Network Setting
Confirm or change the network settings configured on the
ScanFront scanner. (See "Network Setting" on p. 132.)
b Language/Timezone Settings
Set the display language for the touch panel of the
ScanFront, and the region in which the ScanFront will be
used. (See "Language/Timezone" on p. 133.)
IMPORTANT
The time zone setting also affects the time stamp of sent e-mail.
c Date/time settings
Set the date/time for the ScanFront scanner.
time settings" on p. 133.)
b c
e f
(See "Date/
131
Chapter 5 Administrator Settings
d Auto Logout
Set the duration after which auto logout is performed.
"Auto Logout" on p. 134.)
e ScanFront maintenance
Display the ScanFront maintenance Mode screen.
"Device Operation Screen" on p. 151.)
f Format ScanFront
Clear all of the user information registered to the
ScanFront. (See "Initializing ScanFront" on p. 196.)
g SNMP Settings
Configure settings for using SNMP.
Settings" on p. 134.)
(See
(See
(See "SNMP