Backup/Restore Setting Information - Canon ScanFront 400 Instructions Manual

❏ Backup/Restore Setting Information
Back up or restore setting information using a shared
folder on the network at the following times.
When adding another ScanFront
When adding, for instance, another ScanFront, back up the
setting information that was set on the first ScanFront, and
then restore the setting information on the other
ScanFront.
When updating the version of the ScanFront
Back up the setting information before you update the
version of the ScanFront, and then restore the setting
information after the version update is finished.
When submitting the ScanFront for repairs
Before you submit the ScanFront for repairs, back up the
setting information of the ScanFront.
IMPORTANT
• Set [Allow remote operation]
performing restoration. If this is not set to [ON] before
restoration, information for certain settings, including the
language, time zone, and SNMP, will not be applied.
• Before you submit the ScanFront for repairs, back up the
setting information and then initialize the ScanFront.
"Initializing ScanFront" on p. 196.)
37
Chapter 2 ScanFront Setup
(see p. 152) to [ON] before
(See