Backing Up All Settings; Restoring All Settings - Canon ScanFront 400 Instructions Manual

❏ Backing Up All Settings
You can back up the ScanFront settings.
IMPORTANT
The following settings are not included in the backup data
because they are specific to the ScanFront.
• IP address
• Device name
• Touch panel adjustment values
1.
Press [Backup All Settings].
The Backup screen appears.
2.
Enter the save location information.
Hint
• Press [Connection test] to check the connection for the
entered host name.
• Press [Browse] to display the Shared folder screen and then
specify the host and shared folder.
3.
Press [OK].
Backing up starts.
When the process is complete, a message appears.
4.
Press [Yes].
❏ Restoring All Settings
You can restore backed up data to the ScanFront.
IMPORTANT
Set [Allow remote operation]
performing restoration. If this is not set to [ON] before
restoration, information for certain settings, including the
language, time zone, and SNMP, will not be applied.
1.
Press [Restore All Settings].
The Restore screen appears.
2.
Enter the save location information, and then specify
the backed up data.
145
Chapter 5 Administrator Settings
(see p. 152) to [ON] before