Device Configuration - Canon imageFORMULA ScanFront 220 Instructions Manual

6.

Device Configuration

From the Device Configuration screen, you can configure the scanner settings.
a
b
c
d
e
a Network Setting
Confirm or change the network settings of the scanner.
(See "Network Setting" on p. 4-25.)
b Language/Timezone
Configure the language displayed on the touch panel and
the region where it is being used.
Timezone" on p. 4-25.)
IMPORTANT
The time zone setting also effects the time stamp on sent e-mail.
c Device Operation
Configure the setlings for [Display off], [Auto Logout]
and [Low Power Mode]. (See "Device Operation" on
p. 4-25.)
a
b
c
d
e
(See "Language/
4-24
Chapter 4 Web Menu (Administrator Mode)
d Login Options
Select the type of screen that appears when users log in.
(See "Login Options" on p. 4-26.)
e Administrator Settings
Set the password and e-mail address of the Administrator.
(See "Administrator Settings" on p. 4-26.)
IMPORTANT
The e-mail address of the Administrator is used as the
originating address when a user without a registered e-mail
address sends an e-mail message.