Placing A Folded Document - Canon ScanFront 400 Instructions Manual

4.
Adjust the document guides to fit the width of the
document.
IMPORTANT
Make sure that document stacks placed in the feed tray do not
exceed the document guides.
The number of sheets that you can place in the scanner at
one time varies by paper size as follows.
A4/LTR Size or Smaller:
Less than 60 sheets (22 lb bond (80g/m
stacks do not exceed 10 mm in height (including curls).
❏ Placing a Folded Document
Loading mark
2
)). Make sure
47
Sizes Larger than A4/LTR:
Less than 40 sheets (22 lb bond (80g/m
stacks do not exceed 10 mm in height (including curls).
Folio Scan enables you to scan documents that are larger
than A4/LTR and therefore do not fit in the feeder. (The
maximum size is 11" × 17"/A3.) To use the function, fold
the document in half lengthwise and place it into the
feeder. The ScanFront will scan both sides and combine
the scanned images into a single image.
IMPORTANT
• When folding the document, align the right and left sides and
create a sharp, straight fold. Otherwise the document may jam
or the image may not be aligned properly.
• The fold line itself will not be scanned. Keep this in mind if
there is content such as photos, diagrams, or text that spans
the fold.
Chapter 3 Handling
2
)). Make sure