Device Configuration - Canon DR-S130 User Manual

Item Description
Set the subnet mask of the
scanner. If DHCP is enabled, it
provides the subnet mask. The
value must be four decimal
numbers separated by dots and
Subnet Mask
expressed in the [xxx.xxx.xxx.xxx]
format.
When set to [0.0.0.0], a subnet
mask appropriate for the IP
address is automatically used.
Set the IP address of the scanner
gateway.
If DHCP is enabled, it provides the
default gateway. The value must be
four decimal numbers separated by
Default
dots and expressed in the
Gateway
[xxx.xxx.xxx.xxx] format. Also, the
gateway needs to be running in the
same subnetwork as the scanner.
If [0.0.0.0] is set, this setting is
disabled.

Device Configuration

If you click [Device Configuration] on the left menu, the page below is
displayed.
Default Value
None
Item
None
mDNS Setting
SNMP Setting
PIN Setting
COT Admin
Connection
Setting*
* DR-S150 only.
mDNS Setting
If you click [mDNS Setting] on the Device Configuration screen, the
page below is displayed.
100
Description
Moves to the mDNS Setting screen.
Moves to the SNMP Setting screen.
Moves to the PINSetting screen.
Moves to the COT Admin Connection Setting
screen.