Scan Settings - Ricoh 5100WD General Settings Manual

Scan Settings

This section describes the user tools in the Scan Settings menu under Scanner Features.
Default settings are shown in bold type.
Next Original Wait Setting
To divide originals and scan them individually with the Original table to form a single file, select
[Continuous Wait], [Off], or [Set Wait Time] for the waiting status.
The default setting is Set Wait Time, 60 second(s).
If [Set Wait Time] is selected, enter the wait time in seconds (3-999) for placing additional originals
with the number keys. Scanning will start if additional originals are placed and the [Start] key is pressed
within this time. You can end scanning and begin transmission by pressing the [ ] key within this time.
Once the specified time has elapsed, transmission starts automatically.
If [Continuous Wait] is selected, the machine will wait for additional originals until the [ ] key is
pressed. Scanning will start when additional originals are placed and the [Start] key is pressed. You
can end scanning and begin sending by pressing the [ ] key.
If originals are placed in the ADF (auto document feeder), transmission will start without waiting for
additional originals after all originals in the ADF have been scanned, regardless of the specified
settings.
If a paper misfeed occurs or any of the following operations are performed while the machine is
waiting for additional originals, the countdown stops and does not start again until the [ ] key is
pressed.
• Changing the settings such as the scan settings
• Opening the scanner cover
• Pressing the [Interrupt] key to activate the copy mode
Original Output Exit (TWAIN)
Specify a tray to which documents are ejected when using the TWAIN scanner.
The default setting is Top.
• p.10 "Accessing User Tools"
Scan Settings
5
129