Ricoh 5100WD General Settings Manual page 171

1. Press [System Settings].
2. Press [Administrator Tools].
3. Press [Address Book Management].
4. Check that [Program / Change] is selected.
5. Select the user of the registered folder you want to change.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, folder name, or e-mail address.
6. Press [Folder].
7. Select "Connection Type".
If you want to specify a folder in an NDS tree, press [NDS]. If you want to specify a folder on a
NetWare server, press [Bindery].
8. Specify the folder.
To specify a folder, you can either enter the path manually or locate the folder by browsing the
network.
9. Press [Connection Test] to check the path is set correctly.
10. Press [Exit].
11. Press [OK].
12. Press [Exit].
13. Press the [User Tools/Counter] key.
• To change the name, key display and title, see "Changing a Registered Name".
• p.139 "Changing a Registered Name"
Changing the protocol
This section describes how to change the protocol.
Registering Folders
6
169